Easy to set up
1.Connect to wireless,network:wifi+
2.Enter 192.168.19.252 in the browser,then enter the setup interface
3.select the network to be expanded,then enter its password to finish the setup.The expanded network name is xxx_plus
• Input: 5V
• Frequency: 2.4GHz
• Antenna: 1*internal
• Button: reset button
• Interface: 1*USB port
• LED: 3(blue/yellow/red)
• Transmit Power: < 20dBm(EIRP)
• Power Consumption: About 2.25W
• Wireless Security: WPA-PSK/WPA2-PSK
• Operating Humidity: 10%~90% non-condensing
• Storage Humidity: 5%~90% non-condensing
• Standards and Protocols: IEEE 802.11n,IEEE 802.11g,IEEE 802.11b
When the indicator light is blue,it means that the current position is moderate and the signal is good.
When the indicator light is yellow,it means the WIFI+ is too close to the router.
When the indicator light is red,it indicates that it is too far from the router, the position is not suitable as an extension point.
How to get the amplifier to restore factory setting?
In the condition of electricity and hold the Reset button for about 6 seconds,loosen the button,the blue light is put out and on again,flashing,amplifier will restore to factory Setting.
1 x wifi extender
1 x user manual
- Expand WiFi coverage in large and multi-storied homes with rotatable antennas.
- Works with any WiFi router or wireless access point of Starbucks, KFC, McDonald’s, hotel and hospital.
- Intelligent LED signal indicator: You can know its working condition clearly and find the best location to place the repeater.