Hardware Specifications: RTL8196EU + RTL8188ER chip solution
Antenna Specifications: Built-in smart antenna system, the highest gain 2dBi
Wireless Standard: Support IEEE802.11b / g / n standards;
Wireless transmission rate: 11b: 1/2 / 5.5 / 11Mbps
11g: 6/9/12/18/24/36/48 / 54Mbps
RF parameters: maximum transmit power: 50mW (17dBm)
Maximum receiver sensitivity: -96dBm
Operating frequency: 2.4 ~ 2.4835GHz
Button: a WPS / RST button
Physical interface: a 10 / 100Mbps LAN / WAN RJ45 Ethernet port
LED: power status, network interface status, WiFi Status
Power supply: 100 ~ 240V, 50 / 60Hz
Interface: EURO / US regulations (optional)
Channel bandwidth: 20/40 MHz Auto
Security features: WPA-PSK / WPA2-PSK
WPA / WPA2
Working mode: AP / repeater / router / client
Other: a key settings, scan code set (mobile terminal, PC terminal double WEB interface)
Shell: imported ABS material, plastic shell
Physical Characteristics: Dimensions: 3.0 * 2.1 * 1 Inches(75 * 55 * 24mm)
Environment: Operating Temperature: 0 ? ~ 40 ?
Storage temperature: -40 ? ~ 70 ?
Humidity: 10% ~ 90% RH non-condensing
Storage humidity: 5% ~ 90% RH non-condensing
1 x Repeater
1 x Cable
1 x Quick Installation Guide
1 x Warranty Card
1 x Certificate
- 【11N Wireless Technology】: The wireless speed and range to power a complex set of networking applications to create a highly efficient mobile office or entertainment network.
- 【Function】: WR150N can scan two-dimensional code into the phone setting interface, including Repeater Mode, Router Mode, AP Mode. Compatible with any wireless network, router and Wi-Fi enabled devices including smartphone, iPad, tablet, laptop, desktop, smart TV, etc.
- 【Extend Home Wifi to Full Coverage】: WiFi up to 150Mpbs achieves the signal coverage of 150m2, the signal coverage can be extended, leaving no network signal dead zone, but the WiFi signal will not be enhanced.
- 【Exquisite Appearance】: Along with the characteristics of compact, use-small size and wall-mounted design make it easy to deploy and move with flexibility.
- 【Key Relay】: First press the WPS button and then released after 1-2 seconds to complete the pairing, fully compatible with Win XP/Vista/7/8/10.